EN10210 S355J0H ; S355JOH Hot Finished RHS,SHS and CHS Hollow Sections

Beverly Steel Malaysia supplies wide range of S355J0H:EN10210 produced from various countries of origin with a minimum yield strength of 355 N mm², test temperature of 0 degree C at 27joules of RHS-Rectangular Hollow Section, SHS-Square Hollow Section and lupoitalianoorg CHS-Circular Hollow Section and even super sizes or jumbo sizes of hollow sections for Transmission Tower Projects, Deep Water Projects, Oil and Gas Projects,, Power Plants, Sugar Plants, Cranes, MRT-Mass Rapid Transit, MTR-Mass Transit Railway, Terminals, Stations, Bus Stop, Sea Port Facilities, Air Port Facilities, Structural Design Arts for Buildings and Towers, Structural Support for Building and Facilities Expansion, Transport Vehicles, Automotive, Theme Parks, Structural for Theme Park Rides and etc...

EN10210: S355J0H. Dimensions and Properties to https://justcauseit.com/how-fast-to-lose-weight-for-the-summer.html EN10210-1, Tolerance to EN10210-2.

Nearest Equivalent :DIN17100 ST52.3U, DIN 17123/4/5 ST52-3U, BS4360 Gr50C, UNI 7806 Fe 510C,

NF A 35501 E 36-3, NF A 49501 E 36-3.

– block letter "S" means "STEEL FOR STRUCTURAL APPLICATIONS"

– the next figure means the minim. yield value required for wall thickness ≤ 16 mm

– "J0" means impact test value 0° C min. 27 joules

– block letter "H" means "HOLLOW SECTION"

The following typical tables concern chemical and mechanical properties

CHEMICAL ANALYSIS
Norm		C% max Nominal W.T. (mm) ≤ 40		SI % max	Mn % max > 40	P % max	S % max	N % max
Acc.to EN 10027/1 and IC 10	Acc.to EN10027/2	C% max Nominal W.T. (mm) ≤ 40
Acc.to EN 10027/1 and IC 10	Acc.to EN10027/2		≤ 65
S355J0H	1.0547	0.22	0.22	0.55	1.50	0.040	0.040	0.009

MECHANICAL PROPERTIES
Norm		Yield strength			Tensile strength		Min. elongation L_o= 5,56 So				Min.percent. properties
Acc.to EN 10027/1 and IC 10	Acc.to EN10027/2	Nominal W.T. mm			Nominal W.T. mm		Longit. Cross Nominal W.T. mm				Test Temperature ºC	Average min. impact value
		≤ 16	> 16 ≤ 40	> 40 ≤ 65	< 3	≤ 3 ≤ 65	Longit. Cross Nominal W.T. mm
					< 3	≤ 3 ≤ 65	≤ 40	> 40 ≤ 65	> 40 ≤ 40	≤ 65
					510 - 680	490-630	≤ 40	> 40 ≤ 65	> 40 ≤ 40	≤ 65
S355J0H	1.0547	355	345	335	510 - 680	490-630	22	21	20	19	0	27J