S355J2, S355J2+AR Angle Bar, Profile L, RSA-Rolled Steel Angle, Equal Angle Bar.

We are an integrity steel supplier for high strength offshore steel material in South East Asia Region, we only supply steel material according to actual heat number mill certificate (test certificate), we understand the important of your reputation as we only want you to achieve success in your projects.

S355J2, S355J2+AR hot rolled steel angles are used throughout construction and medication for depression engineering industries, Angle Bar is also addressed a Beverly Steel supplies wide variety of https://carbohealth.com/aspergillosis.html S255J2 angle bars from the origin of Thailand, Korea, Japan, China, Spain, Germany, UK, Brazil, USA, UAE etc. As our hot rolled steel angles have a high yield point with -20degree C at 27joules and 34joules to meet your requirement

Application : Structural construction, shipbuilding, bridge building, oil and gas, power plant, MRT - metro rail station, MTR, rail station, terminal, and other civil construction to general engineering.

Classifications	Mechanical Properties
BS EN 10025-2: 2004^AS355J2	Yield Point N/mm²(min.)		Tensile Strength	Yield Ratio%	Elongation % (min.)			Impact
	Thickness		N/mm²	(max.)	Thickness			Thickness ≥ 12mm.
	t ≤ 16	16 < t ≤ 40			t ≤ 5	5 < t ≤ 16	t >16	Temp°C	Energy J (min.)
	355	345	470-630	-	22			-20	27

Classification	Chemical Compositions (ladle analysis), %
BS EN 10025-2 : 2004 S355J2	C	Si	Mn	P	S	CE^B	SW^C	Nb	V	N	Cu	Ni	Cr	Mo	Grain refining element	Micro-alloying element
	max.			max.	max.	%max.	%max			max.	max.	max.	max.	max.	max.	max.
	0.20	0.55 max.	1.60 max.	0.025	0.025	0.45^DEF	-	-	-	-	0.55	-	-	-	-	-

A: Deliver condition type is +AR

B : Carbon Equivalent :(JIS Version) CE = C+Mn/6+Si/24+Ni/40+Cr/5+Mo/4+V/14 (AS, ASTM, BS Standard)

CE=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15

C: Chemical composition on health care law real estate tax sensitivity of welding crank = C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B

D: The max. Carbon Equivalent for t > 30mm. is 0.47%

E: If Cu content is between 0.25 and 0.4%, the max. CE content shall be increased by 0.02%

F: If Si content < 0.030% the max. CE content shall be increase by 0.02% or if Si content < 0.25% the max. CE content shall be increased by 0.01%