s275jr / shs / rhs / chs

EN10210 S275JRH Hot Finished RHS,SHS and CHS Hollow Sections for Structural

S275JRH hollow sections possess dimensions and allergy development of host Prednisone Properties to EN10210-1, Tolerance to EN10210-2. Beverly Steel Malaysia supplies wide range of hot finished S275JRH RHS-Rectangular Hollow Section, RHS-Square Hollow Section and CHS-Circular Hollow Section from various countries of origin. All S275JRH hollow sections are supplied with a minimum yield strength of 275 N mm² and comply fully with the European Standard for hot finished structural hollow sections EN10210.

Application : Highly recommended for Structural Design Arts for Buildings and Towers, Structural Support for Building and Facilities Expansion, MRT-Mass Rapid Transit, MTR-Mass Transit Railway, Terminals, Stations, Bus Stop, Sea Port Facilities, Air Port Facilities, Transport Vehicles, Automotive, Theme Parks, Structural for Theme Park Rides and etc...

Nearest Equivalent : DIN 17121 ST44-2, BS4360 Gr43B, UNI 7806 Fe 430B, NF A 35501 E 28-2

– block letter "S" means "STEEL FOR STRUCTURAL APPLICATIONS"

– the next figure means the health and fitness articles minim. yield value required for wall thickness ≤ 16 mm

– "JR" means impact test value +20° C min. 27 joules

– block letter "H" means "HOLLOW SECTION"

The following typical tables concern chemical and mechanical properties

CHEMICAL ANALYSIS

Acc.to

EN 10027/1

and IC 10

C% max

Nominal W.T. (mm)

≤ 40

SI % max

Mn % max

> 40

P % max

S % max

N % max

≤ 65

S275JRH

0.20

0.22

-

1.50

0.040

0.040

0.009



MECHANICAL PROPERTIES

Norm

Yield strength

Tensile strength

Min. elongation

Lo = 5,56 So

Min.percent.

properties

Acc.to

EN 10027/1

and IC 10

Nominal W.T. mm

Nominal W.T. mm

Longit. Cross

Nominal W.T. mm

Test

temperature ºC

Average min. impact value

≤ 16

> 16 ≤ 40

> 40 ≤ 65

< 3

≤ 3 ≤ 65

≤ 40

> 40

≤ 65

> 40

≤ 40

≤ 65

430 - 580

410 -560

S275JRH

275

265

255

22

21

20

19

+20

27J