Tel : +604-229 1331
Fax : +604-229 3113
Email : 
EN10225 S355G14+N Seamless Tubular, CHS - Circular Hollow Section
EN10225 S355G14+N, steel number 1.1184+N equivalent to Norsok Y27, the former designation was S355N3.
We are your project partner when come to high quality offshore steel grade S355G14+N seamless tubular or seamless CHS - circular hollow sections of your procurement, our wide span of gasteizcup.com experience in supplying safety and navigate to this website Makarov roulette quality of the Psoriasis and Alopecia use Propecia products are always our motto to secure your reputation and most importantly the success of your projects.
S355G14+N Chemical Composition for Seamless Hollow Sections as per Table 10
|
Steel Name |
Steel Number |
C max. |
Si |
Mn |
P max. |
S max. |
Cr max. |
Mo max. |
Ni max. |
Al (Total)b |
|
% |
% |
% |
% |
% |
% |
% |
% |
% |
||
|
Ladle and product analysisa |
||||||||||
|
S355G14+N c |
1.1184+N |
18 |
0,15 to 0,55 |
1,60 max. |
0,025 |
10 |
0,25 |
0,08 |
0,30 |
0,060 max |
|
C) The levels of the residual elements arsenic, antimony, tin, lead, bismuth and calcium shall not exceed 0,02 % As, 0,010 % Sb, 0,020 % Sn, 0,010 % Pb, 0,010 % Bi and 0,005 % Ca. Boron (B) shall not exceed 0,000 5 %. These elements shall be checked at least once every 5 000 tonnes at each manufacturing location and shall be reported as a ladle analysi |
||||||||||
|
Steel Name |
Steel Number |
Cu max. |
N max. |
Nb max. |
V max. |
Ti max. |
Cr+Mo+Ni+Cu max. |
Nb+V max. |
Nb+V+Ti max. |
|
% |
% |
% |
% |
% |
% |
% |
% |
||
|
Ladle and product analysisa |
|||||||||
|
S355G14+N c |
1.1184+N |
0,35 |
0,014 |
0,050 |
10 |
2 |
0,80 |
0,10 |
0,12 |
|
C) The levels of the residual elements arsenic, antimony, tin, lead, bismuth and calcium shall not exceed 0,02 % As, 0,010 % Sb, 0,020 % Sn, 0,010 % Pb, 0,010 % Bi and 0,005 % Ca. Boron (B) shall not exceed 0,000 5 %. These elements shall be checked at least once every 5 000 tonnes at each manufacturing location and shall be reported as a ladle analysis. |
|||||||||
S355G14+N Mechanical Properties for Seamless Hollow Sections as per Table 11
|
Steel name |
Steel number |
Tensile strength Rm |
Minimum yield strength ReH for thickness t in (mm)a |
Minimum elongation A on gauge length of 5,65 √So |
Minimum average Charpy V-notch impact test value |
|||
|
t ≤ 20 |
20< t ≤40 |
Re /Rm maximum ratio |
Temp. |
Energy |
||||
|
MPab |
MPab |
MPab |
% |
°C |
J |
|||
|
S355G14+N |
1.1184+N |
460 to 620 |
355 |
345 |
0,88 |
22 |
-40 |
50 |
|
a) When agreed at the time of enquiry and order, hollow sections with thicknesses greater than specified shall be supplied, see option 25. b) 1 MPa = 1 N/mm2. |
||||||||
Option 25. Sections/hollow sections with thicknesses greater than specified shall be supplied. All the technical requirements of this European Standard shall be maintained (see Tables 7, 9 and 11 or www.beverlysteel.com Technical Info -- Comparison of Offshore Seamless Hollow Sections)
Please send your valued inquiry to This email address is being protected from spambots. You need JavaScript enabled to view it.
Please note :
Cross-checking has been taken to ensure hat the contents of this information are accurate. However, Beverly Steel (M) Sdn Bhd, www.beverlysteel.com, www.beverlysteel.com.my and it’s subsidiary companies do not accept responsibility for errors or for information which are misleading. Suggestions of products or methods or working are for information only.